Convert your remote extruder to a direct drive extrusion using this plate and the required spacer.

Use all other existing parts (Rollers, Screws, etc...

Suitable for 2020 profile

No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling.

No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.

Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or PEI sticker, ensuring high flatness for the bottom of model.

Super Convenient - Very easy to take off the model, no tools needed. Automatically pops up when cold

This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.

Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro. Suitable for other printer brands having the same size

BLTouch ANTCLABS Smart v3.1

Genuine ANTCLABS BLTouch

Comes with mounting brackets for Ender-Serie: Ender-3/Ender-5/Ender-3 pro/ender-5 pro

Direct plug-in for Creality 32-bit 4.2.2/4.2.7 3D printers motherboard.

Can also be interfaced with other motherboard

BLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.

Compatible: Suitable for 1.75mm filament

Wear-resistant copper sleeve,

Modularized Design Compatible with Multiple most printers.

Smooth Filament Traveling: The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.

Simple structure and easy to install.

Blue LED indicates normal filament feed-in, blue LED turns off when filament runs out.

0.4 Nozzle

Thermistor (approx 1m cable)

Heat Cartridge 24v 40w (approx 1m cable)

PTFE Tube (approx 1m cable)

Heat Sink Block

Aluminium Heat BlocK

M6 Pneumatic coupling

M10 Pneumatic coupling

Nominal Voltage: 4.83V

Current Rating: 1.5 (A)

Rated speed: 1-1000 (rpm)

Rated torque: 0.4 (NM)

Ambient Temperatuar: -20℃~+70℃

Height: 40mm

Shaft : 18 mm (suitable for dual gear extruder)

Size 700 x 750 x 900 mm

Suitable for most large 3d printers

Creality Fireproof and Dustproof

Helps to keep constant temperature

Protective Cover Room

Allows you to print ABS and temperature sensitive materials

Suitable for Ender5 Plus/5/5 pro/3 Max,CR-10/10V2/10 V3/10S/10S PRO/10S PRO V2/10MINI,CR-X/CR-20/20PRO

Size 480 x y600 x 720 mm

Suitable for small & medium 3d printers

Creality Fireproof and Dustproof

Helps to keep constant temperature

Protective Cover Room

Allows you to print ABS and temperature sensitive materials

Suitable for Ender5 Plus/5/5 pro/3 Max,CR-10/10V2/10 V3/10S/10S PRO/10S PRO V2/10MINI,CR-X/CR-20/20PRO

3D Printer MK8 Brass Nozzle

Available size 0.2, 0.3, 0.4, 0.5, 0.6, 0.8

For 1.75mm filament diameter Produce consistent prints with smooth and glossy polish

The 3D printer nozzle is made of high quality brass material :

Resistant to rust and corrosion

Sturdy and durable

Easy to install

After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts

Description

The Creality K2 Pro Combo is engineered for professionals who demand exceptional build capacity, high-speed performance, and dependable printing. Featuring a spacious 300 × 300 × 300 mm build volume, an actively heated chamber, and an industrial-grade motion system, it consistently delivers precise, high-quality prints—even with engineering-grade filaments at impressive speeds.

Experience True Multi-Colour Printing

Bring your ideas to life with vibrant multi-colour creations. The K2 Pro Combo supports up to four next-generation Creality Filament System (CFS) units, allowing you to print with up to 16 different filaments in a single project. Intelligent hardware and software work together to provide a seamless Colour Switching 2.0 experience.

CFS Features

• Automatic RFID filament recognition

• Automatic spool switching when a filament runs out

• Built-in filament drying with integrated dehumidifier

• Real-time temperature and humidity monitoring

• Secure spool locking for uninterrupted printing

Tip: The Creality K2 Pro is also available as a standalone printer.

Large Build Volume for Limitless Creativity

With a generous 300 × 300 × 300 mm build area, the K2 Pro Combo gives you the freedom to print larger models without splitting them into multiple parts. Spend less time preparing files and more time creating.

Engineered for Maximum Stability

Built around a robust aerospace-inspired frame made from high-strength aluminium alloy, the K2 Pro offers exceptional rigidity. A precision steel axis combined with four linear rails ensures smooth, vibration-free movement for consistently accurate prints.

Intelligent FOC Servo Motors

Three advanced FOC stepper servo motors power the extruder and X/Y axes, delivering outstanding print quality at high speeds. They also operate remarkably quietly, producing noise levels comparable to a standard keyboard.

High-Speed Printing Without Compromise

Designed for performance, the K2 Pro achieves print speeds of up to 600 mm/s while maintaining exceptional accuracy and surface finish.

Advanced Direct Drive Extruder

The next-generation direct drive extruder features integrated filament-path sensors, an automatic magnetic filament cutter, and hardened steel drive gears. It is fully capable of handling abrasive materials, including carbon fibre-reinforced filaments.

High-Flow Quick-Swap Hotend

The modular high-flow hotend delivers a flow rate of up to 40 mm³/s and supports printing temperatures of up to 300°C. A magnetic toolhead cover allows for fast and convenient hotend replacement.

Heated Chamber for Engineering Materials

An actively heated chamber reaching 60°C provides the ideal environment for demanding materials such as ASA and PPA, improving layer adhesion and significantly reducing warping. Integrated chamber cooling further enhances print quality when needed.

Additional Features

• Built-in AI chamber camera for real-time print monitoring, error detection, and time-lapse recording

• AI nozzle camera that continuously monitors material flow for consistent extrusion

• Seamless integration with CrealityOS, Creality Print, and Creality Cloud

• Integrated air purifier to reduce odours and volatile organic compounds (VOCs)

• 32 GB internal storage

• Smart automatic bed levelling

• And many more intelligent features designed to streamline your printing workflow.
  
  
  

  Technical specifications:

  Device size	445 x 477 x 573 mm
  Net weight	23.7 kg
  Build volume	300 x 300 x 300 mm
  Max. printing speed	600 mm/s
  Max. acceleration	20,000 mm/s²
  Max. printing temperature	300 °C
  Max. heated bed temperature	110 °C
  Max. temperature of chamber heating	60 °C
  Belt tension	manual
  Step servo motors	on X/Y axes and extruder
  Auxiliary cooling fan	1
  Air filter	1
  Levelling	automatic levelling
  built-in RFID recognition	yes
  Chamber camera	1 x 720 pixels (at 30 frames/sec)
  Display	4 inch touch
  Interfaces	WiFi (2.4 G/5 G), USB drive, Creality 485 port, RJ45
  Rated hotend power	100 W