CREALITY

Convert your remote extruder to a direct drive extrusion using this plate and the required spacer.

Use all other existing parts (Rollers, Screws, etc...

Suitable for 2020 profile

No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling.

No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.

Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or PEI sticker, ensuring high flatness for the bottom of model.

Super Convenient - Very easy to take off the model, no tools needed. Automatically pops up when cold

This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.

Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro. Suitable for other printer brands having the same size

BLTouch ANTCLABS Smart v3.1

Genuine ANTCLABS BLTouch

Comes with mounting brackets for Ender-Serie: Ender-3/Ender-5/Ender-3 pro/ender-5 pro

Direct plug-in for Creality 32-bit 4.2.2/4.2.7 3D printers motherboard.

Can also be interfaced with other motherboard

BLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.

Compatible: Suitable for 1.75mm filament

Wear-resistant copper sleeve,

Modularized Design Compatible with Multiple most printers.

Smooth Filament Traveling: The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.

Simple structure and easy to install.

Blue LED indicates normal filament feed-in, blue LED turns off when filament runs out.

0.4 Nozzle

Thermistor (approx 1m cable)

Heat Cartridge 24v 40w (approx 1m cable)

PTFE Tube (approx 1m cable)

Heat Sink Block

Aluminium Heat BlocK

M6 Pneumatic coupling

M10 Pneumatic coupling

Nominal Voltage: 4.83V

Current Rating: 1.5 (A)

Rated speed: 1-1000 (rpm)

Rated torque: 0.4 (NM)

Ambient Temperatuar: -20℃~+70℃

Height: 40mm

Shaft : 18 mm (suitable for dual gear extruder)

Size 700 x 750 x 900 mm

Suitable for most large 3d printers

Creality Fireproof and Dustproof

Helps to keep constant temperature

Protective Cover Room

Allows you to print ABS and temperature sensitive materials

Suitable for Ender5 Plus/5/5 pro/3 Max,CR-10/10V2/10 V3/10S/10S PRO/10S PRO V2/10MINI,CR-X/CR-20/20PRO

Size 480 x y600 x 720 mm

Suitable for small & medium 3d printers

Creality Fireproof and Dustproof

Helps to keep constant temperature

Protective Cover Room

Allows you to print ABS and temperature sensitive materials

Suitable for Ender5 Plus/5/5 pro/3 Max,CR-10/10V2/10 V3/10S/10S PRO/10S PRO V2/10MINI,CR-X/CR-20/20PRO

3D Printer MK8 Brass Nozzle

Available size 0.2, 0.3, 0.4, 0.5, 0.6, 0.8

For 1.75mm filament diameter Produce consistent prints with smooth and glossy polish

The 3D printer nozzle is made of high quality brass material :

Resistant to rust and corrosion

Sturdy and durable

Easy to install

After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts

• Build Size 220x220x270 -- Print speed max(150mm/s), Recommended (60-100 mm/s)
• Dual-Gear Direct Drive Extruder: Compatible with more filaments, Ender 3 S1 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.
• CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed.
• Removable Spring Steel Print Sheet: Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet.
• Higher Printing Precision & Easy to Install: With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. And 96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer is simple and easy.
• Power Loss Recovery and Filament Sensor: Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.

HALOT-MAGE PRO uses an 8K(7680x4320) mono LCD featuring 29.7μm XY resolution, more refined and anti-aliasing than the 50μm of a regular 4K printer. WiFi and ethernet enabled
The large LCD brings a generous 228x128x230mm build volume, giving you more space to create.
10.3’’ 8K LCD