Sort By:  
LCD 1602 Display Blue (LCD Display 1602)
Display Format 16x2 Character
Interface 6800 4-bit Parallel , 6800 8-bit Parallel
Connection Pin Header
Outline Dimension 122.0(W)x44.0(H)x12.9(T)mm
Visual Area 99.00x24.00mm
Active Area 94.84x20.00mm
Character Size 4.84x9.66mm
Dot (Pixel) Size 0.92x1.10mm
Dot (Pixel) Pitch 0.98x1.16mm
IC Package COB
Display Type FFSTN-LCD Black
Backlight Current (Typ) 30mA
Power Supply(Typ) 5V
Supply Current for LCM(Max) 1600uA
Operating Temperature -20℃~70℃
Storage Temperature -30℃~80℃
Rs 125
NeoPixel 8 Bit WS2812 5050 RGB LED (Neopixel x8 )
8 Bit WS2812 Uniquely addressable RGB Led
Size: 11 * 56.2mm (approx)
Chip: WS2811 (built-in LED)
Voltage: 5V
Bright LED, a built-in control chip, only one IO port can control multiple LEDs
Chip built-in shaping circuit, the signal distortion will not accumulate, stable display
Three-color 256-level brightness adjustment, 16 million color true color display, scanning frequency of not less than 400Hz / S
Serial-level interface, through a signal line, to complete the data reception and decoding
The refresh rate of 30 frames/sec, the low-speed mode with the series of not less than 512 points
Data transceiver speeds up to 800Kbps
Highlight LED, light color brightness consistency
Both ends have a series interface, can be directly connected
Rs 175
64 Bit WS2812 (8x8 5050) Neo pixel Board
Voltage:DC 5 V
Color: RGB
Size: 65.3mm x 66.3mm

Package includes:
1×64 Bit WS2812 Development Board
Rs 350
MAX7219 Microcontroller Dot Matrix Module 4 In 1 Display (Matrix 8x8 , cascade of 4 modules)
1.A single module can drive a 8x8 dot matrix common cathode (contains 4 Matrix modules) 
2. Module Operating voltage: 5V
3.Module Size: 12.8 *3.2 *1.3 cm
4. module with input and output interfaces, support for cascading multiple modules
Rs 400
OLED Display I2C (1.3″ I2C OLED)

1.3″ I2C OLED Display

This 1.3″ I2C OLED Display is an OLED monochrome 128×64 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3.3V-5V microcontroller, such as Arduino.


  • Interface: I2C
  • Driver chip: SSH1106
  • Diagonal Screen Size:1.3″
  • Voltage: 3.3-5V
  • Number of Pixels: 128 x 64
  • Color Depth: Monochrome (Blue)
  • Working temperature:-40-70 degree
  • Dimension: 33.5 x 36 x 4.3 mm
Rs 300
Bit WS2812 5050 RGB LED Lamp Panel Module (25) (WS2812)
WS2812 full color LED 
Chip: WS2812B (built in LED)
LED: 5050 package RGB full color highlight
Rs 200
3.2 " Touch Screen 240 x 320 SPI (3.2 " Touch Screen 240 x 320 SPI )

Spi real hardware interface 3.2-inch TFT LCD screen

Type: with touch panel
Size:3.2 inch SPI Serial
Display size:55.00(W)X89.30(H)mm
Driver element: a-Si TFT active matrix
Pixel arrangement: RGB vertical stripe
Driver IC: ILI9341
Backlight: White LED
Color Depth: 65K
Resolution (dots): 240RGB*320Dots
Data Interface: 4-Wire SPI interface
VCC Voltage: 3.3V - 5V
IO Voltage: 3.3V

With touch

Need at least 4 IOs from your MCU
With PCB plate (including power supply IC, SD), compatible with 5110 interface

Rs 1,500
Per Page      1 - 8 of 8
  • 1